TheMercedesService · Independent Mercedes Service · San Diego, CA

Mercedes-Benz Metris 1.5-Inch Lift Kit Installation

Give your Metris more room at steep driveways and uneven campground entrances. We supply and install the Santa Cruz Campers 1.5-inch suspension lift kit in San Diego and check fitment around your wheels, tires and usual load.

Get a kit and installation quote
Low front-side view of a gray Mercedes-Benz Metris showing the front wheel and bumper
A Mercedes-Benz Metris viewed from below the front bumper, with the front wheel and wheel arch in view.

At a glance

The Santa Cruz Campers kit uses front and rear spacers for a nominal 1.5-inch suspension lift. It can give body-mounted parts more room above uneven ground and open up more tire options, subject to fitment checks and alignment.

What does a 1.5-inch lift change on a Metris?

A modest suspension lift can give the front bumper and other body-mounted parts more clearance where a steep driveway meets a flat street or a campground entrance has ruts. It can also create more room around the wheel arches, which helps when you’re considering a larger all-terrain tire.

The practical gain depends on where the van tends to scrape. A bumper, an underbody accessory and the lowest suspension component are different reference points. Tires, vehicle load and the existing suspension all affect the measurements. If you park in a garage or carry a roof rack, allow for the change in overall vehicle height as well.

What comes with the Santa Cruz Campers lift kit?

The manufacturer’s 1.5-inch Metris kit lists front and rear spacers, modified sway-bar links, bushing discs and installation hardware. It’s a spacer-based lift. If your reason for upgrading is excessive bounce, clunking or uneven tire wear, we’ll check the condition of the existing suspension first so the quote addresses the problem you actually have.

How we look at ride height and bumper clearance

Measure the wheel arches to compare ride height at the front and rear. Clearance under the front bumper answers a different question, especially if the front lip is the part that scrapes. For a useful before-and-after comparison, take measurements at the same points, on level ground, with the same tires and a comparable load.

The photos show measurement points on a Metris. The lift kit’s 1.5-inch specification is a nominal figure.

How we check tire fitment and alignment

  1. Confirm the van and its usual load. Send the VIN, current wheel and tire specs and details of any camper build or permanent equipment. We’ll check the condition of the existing suspension and discuss what you want to clear.
  2. Check the proposed wheel and tire fit. Consider diameter, width and offset together. We check clearance in the wheel well and around the suspension, including steering and suspension travel. The tire’s load and speed ratings should suit the vehicle. See the Mercedes-Benz Vans upfitter guidelines.
  3. Check the alignment after installation. Santa Cruz Campers says its kit is designed to allow factory alignment specifications. The alignment measurement verifies where your van actually sits after the work.

Frequently asked questions

Can I buy the lift kit and have it installed in one place?

Yes. TheMercedesService can supply the Santa Cruz Campers kit and install it in San Diego. Send your VIN so we can verify fitment and check current availability before quoting.

Will a 1.5-inch lift let me use larger tires?

It can give you more options. Tire dimensions, wheel width and offset, and clearance through steering and suspension travel determine what fits your van. Share the wheel and tire specs you’re considering before ordering.

Does my Metris need an alignment after the lift?

Plan on a post-install alignment check. Santa Cruz Campers says its kit is designed to align to factory specifications. Verify the results on your individual van.

Is the lift useful on a daily driver or camper?

It can help when you regularly reach steep driveways, uneven parking areas or campground access roads. Check your overall height against the garage or parking structure you use, especially if you also run taller tires or carry gear on the roof.

TheMercedesService · Independent Mercedes Service

Buy and install your Metris lift kit in San Diego

Send your VIN, current tire size and a description of what you want to improve. We’ll confirm kit fitment and availability and quote the parts and installation for your Metris.

Ask for a quote